how to order: website: www .marl.co.uk ? email: sales@marl.co.uk ? ? t elephone +44 (0)1229 582430 ? fax: +44 (0)1229 585155 the information cont ained in this dat asheet does not constitute p art of any order or contract and should not be regarded as a represent ation relating to either product s or service. marl international reserve the right to alter without notice the specification or any conditions of supply for product s or service. l each product will operate over a wide volt age input range l robust st ainless steel housing l 180 viewing angle l full internal potting to resist shock and vibration l sealed to ip67 l t rue bi-polar product professional led indica t ors ?12.7mm mounting samples a v ailable ? marl interna tional l td 2007 : ds 070/07 issue 2 ordering information & t ypical t echnical characteristics (t a = 25c) mean t ime between failure = 100,000 hours. luminous intensity figures refer to the unmodified discrete led. fea tures specifica tions 532 series p ack quantity = 10 pieces page 1 of 2 ^ = product s must be derated according to the derating information. each derating graph refers to specific leds. p ar t number colour lens vol t age current luminous w a ve opera ting st orage dc (vdc) dc (ma) intensity length temp temp v opr lopr lv@20ma (mcd) l p (nm) t opr t stg 532-102-63 red (gaalas) colour dif fused 12-28 6-16 450 660 -40 ~ +85^ -40 ~ +85 y es 532-1 1 1-63 y ellow colour dif fused 12-28 8-20 50 590 -40 ~ +85^ -40 ~ +85 y es 532-1 14-63 green colour dif fused 12-28 8-20 60 565 -40 ~ +85^ -40 ~ +85 y es 532-102-75 red (gaalas) colour dif fused 1 10v ac 6 450 660 -40 ~ +85^ -40 ~ +85 y es 532-1 1 1-75 y ellow colour dif fused 1 10v ac 6 50 590 -40 ~ +85^ -40 ~ +85 y es 532-1 14-75 green colour dif fused 1 10v ac 6 60 565 -40 ~ +85^ -40 ~ +85 y es units v ac/vdc ma mcd nm c c high intensity 102,1 1 1 & 1 14
how to order: website: www .marl.co.uk ? email: sales@marl.co.uk ? ? t elephone +44 (0)1229 582430 ? fax: +44 (0)1229 585155 the information cont ained in this dat asheet does not constitute p art of any order or contract and should not be regarded as a represent ation relating to either product s or service. marl international reserve the right to alter without notice the specification or any conditions of supply for product s or service. samples a v ailable ? marl interna tional l td 2007 : ds 070/07 issue 2 page 2 of 2 532 series ma terials push-on connect ors body s t ainless steel grade 316 nut s t ainless steel grade 316 panel seal v iton t ermination copper with silver flash finish lock w asher s t ainless steel fresnel lens polycarbonate encap sulation pc5430 resin header nylon 6 a82 technical characteristics 925-000-00 is brass tin plated.for use with 532 series lamp s. dimensions in mm (t ypical) not to scale mounting hole to be clean and burr free bs en iso 9001:2000 approved manufacturer dimensions in mm (t ypical) not to scale dimensions in mm (t ypical) not to scale 20ma to 48v ac/dc mounting hole all other volt ages series maximum p anel mounting minimum min/max. power cut out t orque mounting p anel dissip a tion centres thickness 532 825 12.7 1.0 x,y=19.5 1.5-8.0 units mw mm nm mm mm
|